Partitions, ceilings, floors — to the millimetre.
BA13 partitions, thermal and acoustic dry-lining, decorative ceilings, parquet, tiling. Plasterwork that doesn't move, joints you don't see, floors that stay flat over time.
What you judge three years later.
A ceiling that cracks along the plasterboard line, a parquet that squeaks, a skirting that comes away: these are the defects you don't see at handover, but you live with every day two years later. This is where the quality of a project plays out.
Our plasterers work with systematic glued and reinforced tape joints, with proper drying time between each coat, finishing render sanded with grit 120 minimum. Ceilings are installed on primary metal furring — never directly onto the existing surface.
For floors, we take the time to check the flatness of the substrate before any installation: smoothing if needed, levelling screed, acoustic underlay. A parquet laid on an approximate floor will not last.
From plasterboard to solid parquet.
BA13 partitions
Separating, distributing partitions, dressing rooms. Standard, water-resistant (bathroom), fire- or acoustic-rated plasterboard depending on the room.
Insulating dry-lining
Glued or framed dry-lining with mineral or bio-sourced wool. Ideal for interior energy retrofit.
Ceilings & dropped ceilings
Suspended BA13 ceilings, technical dropped ceilings, decorative drops, integrated LED lighting.
Parquet & laminate
Solid, engineered or laminate parquet. Floating, glued or nailed installation depending on use and substrate.
Tiling
Large-format tiles, ceramics, mosaic. Straight, diagonal, herringbone laying. Floors and walls, indoor and outdoor.
Smoothing & screed
Self-levelling smoothing, anhydrite or cement liquid screed. Flat and even substrate before any covering installation.
A plasterwork or finishing project?
We come and measure, tell you what is feasible, and give you a clear quote.
We can also help you with:
Let's work together on your next project.
Whether it's a bathroom to redo or a full façade to insulate — one call is enough to get started.